EFIT_SNAP.DAT_MSE2_J1 (rename to EFIT_SNAP.DAT for EFITD)

 $efitin
  scrape=0.04      nextra=2           itek=5           error=2.e-3
  qvfit=0.0        fwtbp=0.           kffcur=4         kppcur=2
  fwtqa=0.00       zelip=1.0e7        iavem=5          iavev=10
  pcurbd=0.0       fcurbd=0.0         n1coil=2         errmin=2.e-3
  fwtsi =  1., 1., 1. ,1., 1., 1., 1., 1., 1., 1.,
           1., 1., 1., 1., 1., 1., 1., 1., 1., 1.,
           1., 1., 1., 1., 1., 1., 1., 1., 1., 1.,
           1., 1., 1., 1., 1., 1., 1., 1., 1., 1.,
           1.
  fwtmp2=68*1.   fwtgam=35*1.
  fwtcur=  1.  fwtdlc=0.0    nccoil=1
  kzeroj=1     rzeroj=0.       vzeroj=0.1    psiwant=0.99
 $
  NAMELIST input parameters               03/07/91
  calfa  : P' constraint matrix
  cgama  : FF' constraint matrix
  errmin : minimum convergence error before exit
  error  : relative equilibrium convergence error
  fcurbd : 1. for zero FF' at edge, 0 for finite FF'
  fwtbp  : 1 for similar P' and FF' profiles, 0 otherwise
  fwtcur : fitting weight for plasma current, RL01 if use
           vessel
  fwtdlc : > 0. to include diamagnetic flux in fit
  fwtgam : MSE
  fwtmp2 : fitting weight for magnetic probes
  fwtqa  : axial q constraint, 1 to include, 0 for none
  fwtsi  : fitting weight for flux loops
  iavem  : +- averaging time in ms for magnetic data
  iavev  : +- averaging time in ms for loop voltage
  icinit : current channel initialization
           2 : parabolic and elliptical
         -12 : parabolic and elliptical first timeslice
               and previous timeslice subsequently
  ifitvs : 1 to include vessel model
  itek   : plottig option, 0 for none, 4 for DISPOP file 55MFIT.POP
           5 for PLTOUT.OUT for use with EFIT:PLOT.
           > 10 for itek-10 number of plots.
  kcaldia: 0 compensated diamagnetic flux
           1 un-compensated diamagnetic flux
           2 to turn off
  keqdsk : 0 binary EQDSKs, 1 for ascii, -1 binary A only, 2 ascii A only
  kffcur : number of fitting parameters in FF'
  kppcur : number of fitting parameters in P'
  kzeroj : 1 to turn on J constraint
  mxiter : maximum number of iterations, - for iteration history
  nextra : number of external field lines to plot
  pcurbd : 1. for zero P' at edge, 0 for finite P'
  psiwant: value of normalized flux at surface where J constraint
           is desired
  qvfit  : constrainted axial q value
  relax  : equilibrium relaxation parameter
  rzeroj : 0=flux surface average J constraint, -=at dominanted
           X point, +=local J at RZEROJ
  scrape : total radial width in m to plot external field lines
  vzeroj : value of normalized J (to I/Area) for J constraint
  xalpa  : P' constraints vector
  xgama  : FF' constraint vector
  zelip  : initial guess for bounbary surface vertical position in m,
           > 1.e7 for guess based on magnetic probe signals